关注我们 会员登录
退出登录
MIIT Calling for Comments on Six Mandatory National Standards (Draft for Comments) - JUN 2023
#Compliance
发布日期: 2023-06-28 18:16:27
价格: USD 0.00
总页数: 0
总字数: 0

MIIT is call for comments on the following mandatory standards, stakeholders are advised to make comments during June16~August 16, 2023.

 

No.

standard name

standard summary

Standards to be replaced

Proposed implementation date

1.       

Rules for classification and labelling of chemicals—Part 1:General specifications


This document sets out the terms and definitions related to the   classification and labelling of chemicals as well as the hazards classification,   labelling and safety manuals of chemicals.
  This document applies to the classification and labelling of chemicals under   the Globally Harmonized System of Classification and Labeling of Chemicals   (GHS) issued by the United Nations. Chemicals as insecticidal residues in   pharmaceuticals, food additives, cosmetics and food products are not covered in   this document when they are ingested intentionally. However, if workers are likely to be exposed, or there is a   potential for exposure during transport, the provisions of this document must   still be followed. Where laws and regulations provide   otherwise, follow those provisions.

Note: Requirements for the label of transport package in the Proposal   for Transport of Dangerous Goods - Model Regulations shall be applied in   priority.

GB 13690-2009

Implemented 6   months after publication

2.       

Rules for classification and labelling of chemicals ---Part X: Desensitized explosives


This part of GB 30000 specifies the   terms and definitions, classification criteria, determination logic and   guidance, labeling of desensitized explosives.

This part applies to the   classification and labelling of desensitized explosives in accordance with   the United Nations Globally Harmonized System of Classification and Labelling   of Chemicals (GHS).


Implemented 12   months after publication

3.       

Explosion protected technical code for equipments in explosive atmospheres


This document specifies the   explosion-proof protection requirements for equipment and facilities in   various types of explosive environment-hazardous places, as well as the   common explosion-proof safety technical requirements for equipment and   protection systems in design, manufacturing, inspection, sales, site   classification, selection, installation, use, repair and maintenance.

This document does not apply to   equipment and protective systems used in hazardous places where the explosion   hazard is caused solely by the explosive substance itself or by unstable   chemical substances.

GB25285.1-2010,

GB   25285.2-2010,

GB3836.1-2010,

GB   3836.13-2013,

GB3836.14-2014,

GB   3836.19-2010,

GB3836.20-2010,

GB   3836.2-2010,

GB3836.3-2010,

GB   3836.4-2010,

GB3836.8-2014,

GB   3836.9-2014,

GB20800.3-2008,

GB25286.1-2010,

GB25286.2-2010,

GB25286.3-2010,

GB25286.5-2010,

GB25286.6-2010,

GB25286.8-2010,

GB20800.1-2006,

GB20800.2-2006,

GB12476.1-2013,

GB12476.4-2010,

GB12476.5-2013,

GB12476.6-2010,

GB 12476.7-2010

Implemented 12 months   after publication

4.       

Safety technical specification for electrical equipment for measurement,control and laboratory use


This document specifies the requirements   of electrical equipment for measurement, control and laboratory use,   including marking and documentation, protection against electric shocks, mechanical   hazards, flame spread, fluid and solid foreign bodies, radiation (including   laser sources) and sound and ultrasonic pressures, protection against   released gases and substances, as well as against explosions and implosions,   resistance to mechanical stress, temperature limits for equipment and heat resistance,   components and assemblies, and the protection with interlocking devices.

This document applies to electrical   equipment for measurement, control and laboratory use, including industrial   automation equipment.

GB 4793.1-2007,GB   4793.2-2008,

GB 4793.3-2008,

GB 4793.5-2008,

GB 4793.6-2008,

GB 4793.7-2008,

GB 4793.9-2013

Implemented 12 months   after publication

5.       

Safety and technical standards for cleaning products


This document specifies the terms   and definitions of washing products, raw material requirements, product requirements,   test methods and labeling requirements.
      This document applies to washing   products produced and sold (including imports) in the People's Republic of China   (except cosmetics, disinfection products and food detergents).

This document does not apply to   aerospace, nuclear industry, military, semiconductor (including integrated   circuit) manufacturing washing products.

GB/T   26396-2011

Implemented 12 months   after publication

6.       

Safety technical specification of lithium-ion battery for electric bicycle


This document specifies the safety   requirements and test methods for lithium-ion battery cells and battery packs   for electric bicycles.

This document applies to   lithium-ion battery cells and battery packs for electric bicycles in   accordance with GB 17761.


Implemented 12   months after publication

 

Since no international standard was used for reference in developing these standards, overseas stakeholders should be aware there could be significant discrepancies between these standards and the ones they follow.